Skip to Content
MilliporeSigma
All Photos(1)

Documents

433667

Sigma-Aldrich

Titanium

evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

Empirical Formula (Hill Notation):
Ti
CAS Number:
7440-32-6
Molecular Weight:
47.87
EC Number:
231-142-3
MDL number:
MFCD00011264
UNSPSC Code:
12352300
PubChem Substance ID:
24867152
NACRES:
NA.23

Quality Level

100

assay

≥99.99% trace metals basis

form

evaporation slug

autoignition temp.

860 °F

resistivity

42.0 μΩ-cm, 20°C

diam. × L

6.3 mm × 6.3 mm

weight

~0.8 g (one slug)

bp

3287 °C (lit.)

mp

1660 °C (lit.)

density

4.5 g/mL at 25 °C (lit.)

SMILES string

[Ti]

InChI

1S/Ti

InChI key

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Related Categories

Storage Class

11 - Combustible Solids

wgk_germany

nwg

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Customers Also Viewed

Slide 1 of 2

1 of 2

Titanium powder, <45 μm avg. part. size, 99.98% trace metals basis

Sigma-Aldrich

366994

Titanium

Gold beads, 1-6 mm, 99.999% trace metals basis

Sigma-Aldrich

326542

Gold

A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
R Khataee et al.
Journal of nanoscience and nanotechnology, 13(7), 5109-5114 (2013-08-02)
In the present study, self-cleaning and mechanical properties of white Portland cement by addition of commercial available TiO2 nanoparticles with the average particle size of 80 nm were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET were used
Study of a TiO2 photocatalytic coating for use in plasma catalysis.
K Van Wesenbeeck et al.
Communications in agricultural and applied biological sciences, 78(1), 227-233 (2013-07-24)
Woo-Byoung Kim et al.
Journal of nanoscience and nanotechnology, 13(7), 4622-4626 (2013-08-02)
To investigate the microstructural effects of the synthesized TiO2 nanopowders such as particle size, specific surface area, pore size and pore distributions for the application of an anode material of dye-sensitized solar cells (DSSC), size-controlled and well-dispersed TiO2 nanopowders were
View All Related Papers

Articles

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service