Iron (Total) in Plant Material
Reagents
Product No. 173016 Spectroquant® VIS Spectrophotometer Prove 100 or
Product No. 173017 Spectroquant® UV/VIS Spectrophotometer Prove 300 or
Product No. 173018 Spectroquant® UV/VIS Spectrophotometer Prove 600 or
Product No. 109748 Spectroquant® Photometer NOVA 30 or
Product No. 109751 Spectroquant® Photometer NOVA 60 or
Product No. 173632 Spectroquant® Colorimeter Move 100
Product No. 114946 Rectangular cells 10 mm and/or
Product No. 114947 Rectangular cells 20 mm and/or
Product No. 114944 Rectangular cells 50 mm
Product No. 114549 Spectroquant® Iron Cell Test
Product No. 114896 Spectroquant® Iron Cell Test*
Product No. 114761 Spectroquant® Iron Test
Product No. 100796 Spectroquant® Iron Test
Product No. 100456 Nitric acid 65 % for analysis
Product No. 100731 Sulfuric acid 95 - 97 % for analysis
Product No. 100519 Perchloric acid 70 % for analysis
Product No. 116754 Water for analysis
*not compatible with Move 100
Sample Preparation
Ground the plant material finely and pass through a sieve (mesh 0.4 - 0.7 mm) and dry the material at 105 °C for 3 hours.
Add 1.0 g of the dried material to a mixture of 1.5 mL nitric acid 65 %, 0.5 mL perchloric acid 70 %, 1 mL sulfuric acid 95 - 97 % and heat until white fumes are envolved (fume cupboard!). Dissolve the residue, after cooling, in water for analysis and fill up to the mark in a 100-mL standard volumetric flask and mix well.
Analysis
Determine with the above mentioned test kits.
Calculation
Iron (total) content in mg/kg Fe = | Analysis value in mg/L Fe x 100 |
Weight of sample in g |
Um weiterzulesen, melden Sie sich bitte an oder erstellen ein Konto.
Sie haben kein Konto?